Command Reference Guide

56 ● debugging bims all 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging bims all
Purpose Use the debugging bims all command to enable BIMS debugging.
Use the undo debugging bims all command to disable BIMS debugging.
Syntax debugging bims all
undo debugging bims all
Default By default, BIMS debugging is disabled.
Example Enable BIMS debugging.
<3Com> debugging bims all
<3Com> system-view
[3Com] bims request
Now start visit the bims server .
*0.1252374 3Com BIMS/8/debug2:
The host name is:10.153.21.96, the Path is:/bims/service, Port:80
HTC_SendMessage req msg action!
[3Com]
[3Com]
*0.1253285 3Com BIMS/8/debug2:
HTC_SendMessage req msg action,ulRet = 0
*0.1253286 3Com BIMS/8/debug2:
Msgid = 2
*0.1253287 3Com BIMS/8/debug2:
The return code string is: 0
*0.1253287 3Com BIMS/8/debug2:
FileID is = 12
*0.1253288 3Com BIMS/8/debug2:
FileType is cfg
*0.1253289 3Com BIMS/8/debug2:
FileSize = 775
*0.1253289 3Com BIMS/8/debug2:
Digest = 90 1b b6 c9 2f e7 4e ec 8d 8f 5a d6 13 0d 55 3e
*0.1253290 3Com BIMS/8/debug2:
The length of the cfg file is 775
*0.1253291 3Com BIMS/8/debug2:
Come into BIMS_ExcuteDownCfg!
[3Com]
[3Com]
% FTP server has been started
[3Com]
[3Com]
% Unrecognized command found at ’^’ position.
[3Com]
bims is enable
Ready to save current build run info! ........
Current configuration has been saved to the device successfully.
*0.1271100 3Com BIMS/8/debug2:
Ok,success to deal with the download config file!
*0.1271101 3Com BIMS/8/debug2: