Command Reference Guide

172 ● ip-precedence 3Com Router 5000 Family and Router 6000 Family
Command Reference
■ The IP packets carrying certain priorities are transmitted over the PVCs specified
for them using the
ip-precedence { pvc-name [ vpi/vci ] | vpi/vci }
min [ max ] command. If no PVC is specified for the IP packets with certain
priorities, they are transmitted over the PVC specified using the
ip-precedence
{
pvc-name [ vpi/vci ] | vpi/vci } default command if there is any. If no
default PVC is specified, the primary PVC is used.
■ This command is only for setting the PVCs within the PVC-Group. The specified
minimum preference
min must be less than or equal to the specified maximum
preference
max.
Note that setting PVC service map does not change the precedence levels of IP
packets. To change the precedence levels of IP packets, you may configure CAR.
Related Commands ■ pvc
■ pvc-group