Command Reference Guide

3Com Router 5000 Family and Router 6000 Family interface mfr ● 167
Command Reference
interface mfr
Purpose Use the interface mfr command to create a multilink frame relay bundle
interface or sub-interface and enter the corresponding interface view.
Use the undo interface mfr command to delete a specified multilink frame relay
bundle interface or sub-interface.
Syntax interface mfr interface-number [ .subnumber ]
undo interface mfr interface-number [ .subnumber ]
Parameters interface-number
MFR interface number. Valid values are 0 to 1023.
subnumber
MFR subinterface number. Valid values are 0 to 4095.
Default By default, there is no multilink frame relay interface or sub-interface.
Example Create a multilink frame relay bundle interface with a point-to-multipoint
sub-interface.
[3Com] interface mfr 4
[3Com-MFR4] quit
[3Com] interface mfr 4.1
[3Com-MFR4.1]
View This command can be used in the following views:
■ System view
Description Before using the undo interface mfr command to delete an MFR interface, you
must delete all physical interfaces from the MFR interface.
Before an MFR sub-interface is created, the MFR interface must be created first.
Related Commands ■ link-protocol fr mfr
■ mfr bundle-name