Command Reference Guide

166 ● interface bridge-template 3Com Router 5000 Family and Router 6000 Family
Command Reference
interface bridge-template
Purpose Use the interface bridge-template command to create a bridge template
interface, connecting the specified bridge set to the routing network.
Use the undo interface bridge-template command to delete the bridge
template interface.
Syntax interface bridge-template bridge-set
undo interface bridge-template bridge-set
Parameters bridge-set
Bridge set number. Valid values are 1 to 255.
Example Create interface bridge-template 1.
[Router] interface bridge-template 1
[3Com-Bridge-template1]
View This command can be used in the following views:
■ System view
Description Each bridge set can have only one bridge template interface.
Related Command bridge routing-enable