Command Reference Guide

162 ● fr pvc-protect 3Com Router 5000 Family and Router 6000 Family
Command Reference
fr pvc-protect
Purpose Use the fr pvc-protect command to configure the protection mode for a PVC in
a PVC group.
Use the undo fr pvc-protect command to remove protection of a PVC group
member.
Syntax fr pvc-protect dlci { group | individual }
undo fr pvc-protect dlci
Parameters dlci
DLCI number of the PVC to be protected. Valid values
are 17 to 1006.
group
Specifies to use group protection mode.
individual
Specifies to use individual protection mode.
Default By default, the system does not protect any PVC in a PVC group.
Example Specify to protect PVC 100 in PVC group 123 in individual mode.
<3Com> system-view
[3Com] interface serial1/0/0
[3Com-Serial1/0/0] fr pvc-group 123
[3Com-fr-pvc-group-Serial1/0/0-123] fr pvc-protect 100 individual
Specify to protect PVC 200 and PVC 300 in PVC group 123 in group mode.
<3Com> system-view
[3Com] interface serial1/0/0
[3Com-Serial1/0/0] fr pvc-group 123
[3Com-fr-pvc-group-Serial1/0/0-123] fr pvc-protect 200 group
[3Com-fr-pvc-group-Serial1/0/0-123] fr pvc-protect 300 group
View This command can be used in the following views:
■ FR Pvc-Group view
Description Use the fr pvc-protect command to configure the protection mode for a PVC in
a PVC group.
Use the undo fr pvc-protect command to remove protection of a PVC group
member.