Command Reference Guide

3Com Router 5000 Family and Router 6000 Family fr map bridge ● 153
Command Reference
fr map bridge
Purpose Use the fr map bridge command to add a bridge-set to frame relay map entry.
Use the undo fr map bridge command to delete a bridge-set to frame relay map
entry.
Syntax fr map bridge dlci broadcast
undo fr map bridge dlci
Parameters dlci
Local VC number. Valid values are 16 to 1007.
broadcast
Specifies the broadcast attribute of the map.
Default By default, no bridge-set to frame relay map is configured.
Example On the interface Serial1/0/0, configure a bridge-set to frame relay map entry on the
VC with DLCI 50.
[3Com-Serial1/0/0] fr map bridge 50 broadcast
View This command can be used in the following views:
■ Interface view
Related Command display fr map