Command Reference Guide

152 ● fr lmi type 3Com Router 5000 Family and Router 6000 Family
Command Reference
fr lmi type
Purpose Use the fr lmi type command to configure the Frame Relay LMI protocol type.
Use the undo fr lmi type command to restore to the default value of LMI
protocol type.
Syntax fr lmi type { ansi | nonstandard | q933a }
undo fr lmi type
Parameters ansi
Standard LMI protocol type of ANSI T1.617
Appendix D.
nonstandard
Nonstandard compatible LMI protocol type.
q933a
Standard LMI protocol type of Q.933 Appendix A.
Default By default, the LMI protocol type is q933a.
Example Set the FR LIMI type of Serial1/0/0 to nonstandard.
[3Com-Serial1/0/0] fr lmi type nonstandard
View This command can be used in the following views:
■ Interface view
Description The NE16E/08E/05 routers usually support three LMI protocols, namely, Q.933
Appendix A, ANSI T1.617 Appendix D and Nonstandard compatible LMI protocol.
Related Command display interface