Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
961962963964965966967968969970
3Com Router 5000 Family and Router 6000 Family fr lmi t392dce ● 151
Command Reference
fr lmi t392dce
Purpose Use the fr lmi t392dce command to set T392 parameter at the DCE side.
Use the undo fr lmi t392dce command to restore the default configuration.
Syntax fr lmi t392dce t392-value
undo fr lmi t392dce
Parameters t392-value
Value of the polling timer (in seconds). Valid values are
5 to 30 seconds.
Default By default, the parameter value is 15s.
Example Set the Frame Relay interface Serial1/0/0 to operate in DCE mode and set T392 to
10s.
[3Com] interface Serial1/0/0
[3Com-Serial1/0/0] link-protocol fr
[3Com-Serial1/0/0] fr interface-type dce
[3Com-Serial1/0/0] fr lmi t392dce 10
View This command can be used in the following views:
■ Interface view
Description This parameter defines the maximum time for DCE waiting for a Status-Enquiry.
T392 at DCE side should be greater than T391 at DTE side.
Related Command fr interface-type