Command Reference Guide

3Com Router 5000 Family and Router 6000 Family datasize ● 53
Command Reference
datasize
Purpose Use the datasize command to configure the size of test packets.
Use the undo datasize command to restore the default.
Syntax datasize size
undo datasize
Parameters size
Test packet size in bytes, the range of which depends
on test type.
The configuration of packet size is only supported by ICMP, UDP and jitter tests. The
configuration voids other test types.
Description Use the datasize command to configure the size of test packets.
Use the undo datasize command to restore the default.
Example Set the size of ICMP test packets to 50.
[Router-hwping-administrator-icmp] datasize 50
Table 2 Test packet size of HWPing
Test Type Code Range Default value
Jitter None 68-8100 68
Jitter G.711 A-Law 16-1500 172
Jitter G.711 U-Law 16-1500 172
Jitter G.729 A-Law 16-1500 32
ICMP None 4-8100 56
UDP None 4-8100 100
Other None 4-8100 0