Command Reference Guide

136 ● fr compression iphc 3Com Router 5000 Family and Router 6000 Family
Command Reference
fr compression iphc
Purpose Use the fr compression iphc command to enable the IP header compression.
Use the undo fr compression iphc command to disable the function.
Syntax fr compression iphc
undo fr compression iphc
Parameters None
Default By default, the Frame Relay compression function is disabled.
Example Configure the Frame Relay interface Serial 4/1/0 to adopt IP header compression.
[3Com-Serial4/1/0] fr compression iphc
View This command can be used in the following views:
■ Frame Relay Interface view
Related Command fr map