Command Reference Guide

3Com Router 5000 Family and Router 6000 Family enable deactivate ● 131
Command Reference
enable deactivate
Purpose Use the enable deactivate command to enable the router to actively deactivate
the BSV interface.
Use the undo enable deactivate command to disable the router to actively
deactivate the BSV interface.
Syntax enable deactivate
undo enable deactivate
Parameters None
Default By default, the router is enabled to actively deactivate the BSV interface.
Example Disable the router to perform active BSV interface deactivation.
[3Com-Bsv2/0/0] undo enable deactivate
View This command can be used in the following views:
■ BSV Interface view
Description If disabled to actively deactivate the BSV interface, the router deactivates the interface
only when the interface is shut down or the BRI line is disconnected. Disabling active
BSV interface deactivation allows the BRI line to stay in the active state, ensuring BSV
calls to be completed rapidly. This is not preferred however, if occasional BRI line
deactivation is desired.
This command is only valid at the BSV network side.When configured at the BSV user
side, this command does not take any effect.