Command Reference Guide

128 ● display x25 x2t switch-table 3Com Router 5000 Family and Router 6000 Family
Command Reference
display x25 x2t switch-table
Purpose Use the display x25 x2t switch-table command to display the dynamic
switching routing table and static routing table.
Syntax display x25 x2t switch-table
Parameters None
Example Display the X2T dynamic switching routing table on the router.
[Router] display x25 x2t switch-table
■ X.121 Interface [LCD ]<--> Ip Address port SocketId
■ ==========================================================
■ 222 Serial0/0/0 [SVC:1024 ] <--> 20.1.1.1 102 2
NULL Serial0/0/0 [PVC:1 ] <--> 20.1.1.1 104 2
From the first entry in this table, we know that the router has
established an X2T SVC connection with one end connecting X.25 of
Serial0/0/0 and the other a TCP connection. The X.25 uses a virtual
circuit (VC) whose LCD is 1024 and the TCP connection whose port is 102,
socket is 2 and the remote IP address is 20.1.1.1.
From the second entry in this table, we know that the router has
established an X2T PVC connection with one end connecting X.25 of
Serial0/0/0 and the other a TCP connection. The X.25 uses a virtual
circuit (VC) whose LCD is 1 and the TCP connection of which the Socket
is 2, remote IP address is 20.1.1.1 and the port is 102.
View This command can be used in the following views:
■ Any view
Description You can view the switch entry from X25 to TCP dynamically established by router with
the
display x25 x2t switch-table command. When a router sets up a
connection, this entry exists and when you close the connection, the entry is deleted.