Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display x25 vc ● 127
Command Reference
Interface: Serial2/0
PVC 1
State: D3
PVC <--> XOT Serial2/0/0-1.1.1.1 PVC 1 connected
Window size: input 2 output 2
Packet Size: input 128 output 128
Local PS: 0 Local PR: 0 Remote PS: 0 Remote PR: 0
Local Busy: FALSE Reset times: 0
Input/Output:
DATA 0/0 INTERRUPT 0/0
RR 0/0 RNR 0/0 REJ 0/0
Bytes 0/0
Snd Queue(Current/Max): 0/200
Interface: Serial2/0/0
SVC 59
State: P4
PAD: UI-130 From remote 130 connected to local 220
Window size: input 2 output 2
Packet Size: input 128 output 128
Local PS: 3 Local PR: 1 Remote PS: 1 Remote PR: 2
Local Busy: FALSE Reset times: 0
Input/Output:
DATA 9/11 INTERRUPT 0/0
RR 6/2 RNR 0/0 REJ 0/0
Bytes 53/363
Snd Queue(Current/Max): 0/200
View This command can be used in the following views:
■ Any view
Description SVC (Switched Virtual Circuit) is set up temporarily by X.25 through call connection
when data transmission is required. PVC is configured manually and exists regardless
of the data transmission requirement. When the router works in X.25 switched mode,
virtual circuits will be set up in order to transfer the switched data. The information
about these virtual circuits can be shown via this command, and only some fields in
the displayed information differ.
Related Commands ■ x25 pvc
■ x25 switch pvc
■ x25 xot pvc
■ x25 fr pvc