Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display x25 switch-table svc ● 125
Command Reference
display x25 switch-table svc
Purpose The command display x25 switch-table svc is used to display X.25
switching routing table.
Syntax display x25 switch-table svc { dynamic | static }
Parameters None
Example Display X.25 switching routing table.
[3Com] display x25 switch-table svc static
Number Destination Substitute- Substitute- CUD SwitchTo(type/name)
src dst
1 11 I/Serial2/0/0
2 22 I/Serial2/1/0
3 133 H/hg1
4 132 T/123.123.123.123
5 133 T/123.123.123.123
T/124.124.124.124
T/125.125.125.125
6 111 222 333 T/4.4.4.4
Total of static svc is 6.
The item type of SwitchTo meaning:
I: interface H: hunt-group T: xot
The following table introduces the meaning of each field in the displayed information.
View This command can be used in the following views:
■ Any view
Related Command x25 switch svc
Table 1 Description on each field in the command display x25 switch-table svc
Field Description
Number Sequence number of this route in the routing table
Substitute-src X.121 source address after substitution, if the content is blank, it
means no substitution.
Substitute-dst X.121 destination address after substitution, if the content is blank,
it means no substitution.
CUD Call User Data
SwitchTo Forwarding address of this route, including interface, XOT channel
and hunt group