Command Reference Guide

3Com Router 5000 Family and Router 6000 Family databits ● 51
Command Reference
databits
Purpose Use the databits command to set data bits on the user interface.
Use the undo databits command to restore the default.
Syntax databits { 5 | 6 | 7 | 8 }
undo databits
Parameters 5
Five data bits.
6
Six data bits.
7
Seven data bits.
8
Eight data bits, which is the default.
Example Set data bits to 5.
[3Com-ui-aux0] databits 5
View This command can be used in the following views:
■ User Interface view
Description The configuration can take effect only when the serial interface works in the
asynchronous flow mode.