Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display x25 pad ● 123
Command Reference
display x25 pad
Purpose Use the display x25 pad command to view X.25 PAD connection information.
Syntax display x25 pad [ pad-id ]
Parameters pad-id
PAD ID. Valid values are 0 to 255. If it is not specified,
all PAD connection information will be displayed.
Example Display X.25 PAD connection information.
[3Com] display x25 pad
UI-INDEX130:
From remote 22 connected to local 11, State: Normal
X.3Parameters(In):
1:1,2:0,3:2,4:1,5:0,6:0,7:21,8:0,9:0,10:0,11:14
12:0,13:0,14:0,15:0,16:127,17:21,18:18,19:0,20:0,21:0,22:0
X.3Parameters(Out):
1:1,2:0,3:2,4:1,5:0,6:0,7:21,8:0,9:0,10:0,11:14
12:0,13:0,14:0,15:0,16:127,17:21,18:18,19:0,20:0,21:0,22:0
Input:
Pkts(total/control): 13/2 bytes:12
queue(size/max) :0/200
Output:
Pkts(total/control): 15/2 bytes:320
View This command can be used in the following views:
■ Any view
Description PAD is a kind of application similar to telnet. It can establish the connection between
two ends through X121 address, and then, to carry out configuration operations.
Related Commands ■ display x25 vc
■ x25 xot