Command Reference Guide

122 ● display x25 map 3Com Router 5000 Family and Router 6000 Family
Command Reference
display x25 map
Purpose Use the display x25 map command to view the X.25 address mapping table.
Syntax display x25 map
View This command can be used in the following views:
■ Any view
Parameters None
Example Display the X.25 address map table.
<3Com> display x25 map
Interface:Serial3/0/0(protocol status is up):
ip address:202.38.162.2 X.121 address: 22
map-type: SVC_MAP VC-number: 0
Facility:
ACCEPT_REVERSE;
BROADCAST;
PACKET_SIZE: I 512 O 512 ;
Description The X.25 address mapping can be configured in two methods: special configuration
(through the
x25 map command) or implied configuration (through the x25 pvc
command). The
display x25 map command can be used to show all the address
mappings.
Related Commands ■ x25 map
■ x25 pvc
■ x25 switch pvc
■ x25 xot pvc
■ x25 fr pvc