Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display x25 hunt-group-info ● 121
Command Reference
display x25 hunt-group-info
Purpose Use the display x25 hunt-group-info command to view the status
information of X.25 hunt group.
Syntax display x25 hunt-group-info [ hunt-group-name ]
Parameters hunt-group-name
Hunt group name.
Example Display the status information of X.25 hunt group hg1.
[3Com] display x25 hunt-group-info hg1
HG_ID : hg1 HG_Type: round-robin
member state vc-used in-pkts out-pkts
Serial0/0/0 Last 2 51 20
Serial1/0/0 Next 1 21 15
1.1.1.1 Normal 1 24 3
The following table introduces the meaning of each field in the displayed information.
View This command can be used in the following views:
■ Any view
Description You can use this command to learn the hunt group of the Router and the information
about the interfaces and XOT channel inside the hunt group.
Related Command x25 hunt-group
Table 1 Description on the fields of the command display x25 hunt-group-info
Field Description
hg1 Hunt group name
round-robin Hunt group call channel selection policy
member Interfaces or XOT channel contained in hunt group
State The state of the current interface or XOT channel, including:
Last:Last: last used
Next: interfaces or XOT channel selected by rotary selection policy
next
Normal: normal state
vc-used Call number on the interface or XOT channel (including call success
and call failure)
in-pkts Input flow on the interface or XOT channel in packets
out-pkts Output flow on the interface or XOT channel in packets