Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display pppoe-server session ● 117
Command Reference
display pppoe-server session
Purpose The command display pppoe-client session is used to display the status
and statistics of PPPoE session.
Syntax display pppoe-client session { summary | packet } [ dial-bundle-number
number ]
Parameters summary
Displays the summary of PPPoE session.
packet
Displays the statistics of PPPoE session data packet.
dial-bundle-number number
Displays the statistics of the specified PPPoE session. If
PPPoE session is not specified, the system will display
the statistics of all PPPoE sessions.
Example Display the summary of PPPoE session.
[3Com] display pppoe-client session summary
PPPoE Client Session:
ID Bundle Dialer Intf Client-MAC Server-MAC State
1 1 1 Eth0 00e0fc0254f3 00049a23b050 PPPUP
2 2 2 Eth0 00e0fc0254f3 00049a23b050 PPPUP
For more details of the display information, see the following table.
Display the statistics of PPPoE session data packet
<3Com> display pppoe-server session packet
PPPoE Client Session:
SID InP InO InD OutP OutO OutD
=============================================================
1 164 6126 0 83 1069 0
2 304 9886 0 156 2142 0
Tabl e 1 Description on the fields of display pppoe-client session summary
Field Description
ID Session ID, PPPoE session ID
Server-MAC Server MAC, server MAC address
Client-MAC Client MAC, client MAC address
Dialer Corresponding Dialer interface of PPPoE session
Bundle Dialer Bundle containing PPPoE session
Intf Ethernet interface containing PPPoE session
State State of PPPoE session