Command Reference Guide

50 ● count 3Com Router 5000 Family and Router 6000 Family
Command Reference
count
Purpose Use the count command to configure the number of packets to be sent for each
test.
Use the undo count command to restore the default.
Syntax count times
undo count
Parameters times
Number of the test packets to be transmitted. Valid
values are1 to 15.
If no value is specified, the default is 1.
Example Send ten packets for each test.
[Router-administrator-icmp] count 10
View This command can be used in the following views:
■ HWPing Test Group view
Description A test timer starts when the system sends the first test packet. In the event that the
times argument is set greater than one, the system continues to send the second one
upon receipt of the reply to the first one. If receiving no reply upon expiry of the timer,
the system sends the second and all the remaining packets likewise.
Related Command frequency