Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display ppp mp ● 113
Command Reference
display ppp mp
Purpose Use the display ppp mp command to view all interface information and statistics
of MP
.
Syntax display ppp mp [ interface interface-type interface-num ]
Parameters interface-type
interface-num
Specifies the interface to be checked.
Example Display information about MP interfaces, which are configured using virtual
templates.
<3Com> display ppp mp
Template is Virtual-Template1
max-bind: 100, min-fragment: 128 ,LFI max-delaly: 100
Bundle 065a23ed48de/mp1250, 2 member, slot 0, Master link is
Virtual-Template1:0
Peer’s endPoint descriptor: 244258d44d45
Bundle Up Time: 2005/03/13 15:04:08:870
0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved,
sequence 0/0 rcvd/sent
The member channels bundled are:
Serial1/0/0 Up-Time:2005/03/13 15:04:08:870
Serial1/0/1 Up-Time:2005/03/13 15:04:08:870
Table 1 Description on the fields of the display ppp mp command
Field Description
Template is
Virtual-Template1
Virtual-template interface
max-bind: 100 The MP bundle can accommodate up to 100 links
min-fragment: 128 Minimum size of an MP fragment is 128 bytes
LFI max-delaly: 100 Maximum delay of transmitting an LFI fragment is 100 milliseconds
Bundle
065a23ed48de/mp1250
Endpoint descriptor or user name
2 member Two channels in the bundle
slot 3 Bundled in slot 3
Peer’s endPoint
descriptor:
244258d44d45
The endpoint descriptor of the peer is 244258d44d45
Bundle Up Time:
2005/03/13
15:04:08:870
The MP channel went up at 15:04:08:870 on March 13, 2005
Master link is
Virtual-Template1:0
Master link is Virtual-Template1:0
0 lost fragments Lost fragments
0 reordered Number of reordered packets
0 unassigned Fragments waiting for reorder
0 interleaved Number of interleaved packets