Command Reference Guide

108 ● display mfr 3Com Router 5000 Family and Router 6000 Family
Command Reference
Add_link_rej(TX/RX): 0/0
Remove_link(TX/RX): 0/0 Remove_link_ack(TX/RX): 0/0
Pkts dropped(in/out): 0/0
Timer: ACK 4, Hello 10
Retry: Max 2, Current 0
Cause code: nonew
Table 1 Description on the fields of the display mfr command
Field Description
Bundle interface ––
Bundle state Operating state of the bundle interface.
Bundle class Class A indicates if there is one bundle link is in up state, the bundle
is flagged as up. Moreover, all bundle links should be tagged as
down before the bundle is down.
Bundle links Physical interfaces of the links in the bundle.
LID Identifier of the bundle link.
Peer LID Identifier of the peer bundle link.
Physical state Operating state of the physical interface.
link state Operating state of the link protocol on the bundle link.
Bundle Link statistics: Statistics about the packets on the bundle link.
Hello(TX/RX) Number of the transmitted and received Hello messages.
Hello messages are sent for maintaining link state.
Hello_ack(TX/RX) Number of transmitted and received Hello acknowledgement
messages.
Hello_ack messages are sent notifying receipt of the Hello messages.
Add_link(TX/RX) Number of transmitted and received Add_link messages.
Add_link messages are sent notifying the peer that the local node is
ready for processing frames.
Add_link_ack(TX/RX) Number of transmitted and received Add_link acknowledgment
messages.
Add_link_ack messages are sent notifying receipt of the Add_link
messages.
Add_link_rej(TX/RX) Number of transmitted and received Add_link reject messages.
Add_link_rej messages are sent notifying reject of the Add_link
messages.
Remove_link(TX/RX) Number of transmitted and received Remove_link messages.
Remove_link messages are sent notifying removal of a link from the
bundle.
Remove_link_ack(TX/RX) Number of transmitted and received Remove_link_ack messages.
Remove_link_ack messages are sent notifying receipt of the
Remove_link messages.
Pkts dropped(in/out) Number of dropped incoming and outgoing packets.
Timer: Ack 4 Time waiting for a Hello_ack message before a Hello message or an
Add_link message (for initial synchronization) is retransmitted on the
bundle link.
Hello 10 Intervals for sending Hello messages.
Retry: max 2 Maximum number of Hello or Add_link sending retries made when
no Hello_ack or Add_link_ack is received on the bundle link.
Current 0 Number of retries
Cause code Cause resulting in the current state of the bundle link.