Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display mfr ● 107
Command Reference
display mfr
Purpose Use the display mfr command to view configuration and statistics information of
multilink frame relay bundle and bundle link. If no bundle or bundle link is specified,
information of all bundles and bundle links will be displayed.
Syntax display mfr [ interface interface-type interface-number | verbose ]
Parameters interface-type
Interface type.
interface-number
Interface number.
verbose
Displays detailed statistics information, including the
number of controlling packets sent and received.
Example Display configuration and state information of all frame relay bundles and frame relay
bundle links.
<3Com> display mfr
Bundle interface:MFR0, Bundle State = up, Bundle Class = A
fragment disabled
Bundle name = MFR0
Bundle links:
Serial0/0/0, PHY state = up, link state = up, Link name = Serial0/0/0
Display detailed state information of all frame relay bundle links.
<3Com> display mfr verbose
LID :Serial0/0/0 Peer LID: Serial1/0/0
Bound to MFR0 (BID:MFR0)
Physical state :up, link state : add sent
Bundle Link statistics:
Add_link: sent 40, received 0
Add_link_ack: sent 0 , received 0
Add_link_rej: sent 0 , received 0
Hello: sent 0 , received 0
Hello_ack: sent 0, received 0
Remove_link: sent 0, received 0
Remove_link_ack: sent 0, received 0
Pkts dropped : in 0. out 0
Timer: Ack 4, Hello 10
Retry : max 2, Current 0
Cause code: differential delay
Bundle interface:MFR1, Bundle state = down, Bundle class = A,
fragment disabled
Bundle name = MFR1
Bundle links:
LID : Serial1/1/1:4 Peer LID:
Bound to MFR1 (BID:MFR1)
Physical state: down, link state: down,
Bundle Link statistics:
Hello(TX/RX): 0/0 Hello_ack(TX/RX): 0/0
Add_link(TX/RX): 0/0 Add_link_ack(TX/RX): 0/0