Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display isdn spid ● 105
Command Reference
display isdn spid
Purpose Use the display isdn spid command to view information on SPID on the BRI
interface encapsulated with the NI protocol.
Syntax display isdn spid [ interface type number ]
Parameters interface type number
Specifies interface type and number.
Example Display the related information of SPID on the NI-supported interface bri 0/0/0.
[3Com] display isdn spid interface bri 0/0/0
Interface Bri 0/0/0:
SPID Type : AUTO
SPID B1 :
SPID Num: 124345
LDN:1234321
Neg State : SPID_ASSIGNED
Init State: INIT_NULL
SPID B2 :
SPID Num: 45645754
LDN:1234321
Neg State : SPID_ASSIGNED
Init State: INIT_NULL
SPID timer : 30 seconds
SPID resend: 2
Table 1 Description on the fields of the display isdn spid interface command
Field Description
SPID Type SPID Type, which can be NIT, STATIC (having only the L3
initialization process), or AUTO (including both the negotiation and
the L3 initialization)
SPID B1 SPID value of the BRI interface B1 channel. It can be a static
configuration or the result of a dynamic negotiation, all depending
on the specified SPID Type.
LDN Local dialing number
SPID Num SPID value of the BRI interface. It can be a static configuration or the
result of a dynamic negotiation, all depending on the specified SPID
Type.
Neg State Negotiation state of the SPID, which can be SPID_UNASSIGNED,
ASSIGN_AWAITING_SPID, SPID_ASSIGNED,
ASSIGN_AWAITING_CALL_CLEAR.
Init State Initialization state of the SPID, which can be INIT_NULL, INIT_IND,
INIT_PROCEEDING, INIT_END, INIT_AWAITING_CALL_CLEAR.
SPID B2 SPID value of the BRI interface B2 channel. It can be a static
configuration or the result of a dynamic negotiation, all depending
on the specified SPID Type.
SPID timer Duration of the timer TSPID
SPID resend SPID message retransmission times