Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display interface mfr 97
Command Reference
display interface mfr
Purpose Use the display interface mfr command to view information on one or all
MFR interfaces, including configuration, state, and packet statistics.
Syntax display interface mfr [ interface-number [ .subnumber ] ]
Parameters interface-number
MFR interface number.
subnumber
MFR subinterface number.
Example Display the configuration and status information about interface MFR 4
<3Com> display interface mfr 4
MFR4 current state : UP
Line protocol current state : UP
Description : MFR4 Interface
The Maximum Transmit Unit is 1500
Internet Address is 12.12.12.2/16
link-protocol is FRAME-RELAY IETF
LMI DLCI is 0, LMI type is Q.933a, frame relay DTE
LMI status enquiry sent 435, LMI status received 435
LMI status timeout 0, LMI message discarded 0
FIFO queuing: (Outbound queue:Size/Length/Discards)
FIFO: 0/75/0
5 minutes input rate 0 bytes/sec, 0 packets/sec
5 minutes output rate 0 bytes/sec, 0 packets/sec
1058 packets input, 832389 bytes, 0 drops
619 packets output, 828190 bytes, 0 drops
Table 1 Description on the fields of the display interface mfr command
Field Description
MFR4 current state : UP Physical layer state
Line protocol current state : UP Link layer state
Description : MFR4 Interface Interface description
The Maximum Transmit Unit is 1500 MTU
Internet Address is 12.12.12.2/16 IP address and mask
link-protocol is FRAME-RELAY IETF Link layer protocol
LMI DLCI is 0, LMI type is Q.933a,
frame relay DTE
DCLI number used by LMI, LMI type, port type and
operating mode
LMI status enquiry sent 435, LMI
status received 435
Transmitted and received LMI status enquiry messages
LMI status timeout 0, LMI message
discarded 0
LMI timeout messages and dropped LMI messages
FIFO queuing: (Outbound
queue:Size/Length/Discards)
Type of the output queue on the interface
5 minutes input rate 0 bytes/sec,
0 packets/sec
Input rate of the interface within the last five minutes
5 minutes output rate 0 bytes/sec,
0 packets/sec
Output rate of the interface within the last five minutes