Command Reference Guide

96 ● display interface bri 3Com Router 5000 Family and Router 6000 Family
Command Reference
display interface bri
Purpose Use the display interface bri command to view status about the specified
ISDN BRI interface.
Syntax display interface bri interface-type interface-number
Parameters interface-type
interface-number
Specifies an interface by its type and number.
Example Display status about ISDN BRI interface BRI 3/0/0:1.
<3Com>display interface bri 3/0/0:1
Bri3/0:1 current state :UP
Line protocol current state :UP
Description : Bri3/0:1 Interface
The Maximum Transmit Unit is 1500
baudrate is 64000 bps, Timeslot(s) Used: 1
Link layer protocol is PPP
LCP opened, MP opened
Output queue : (Urgent queuing : Size/Length/Discards) 0/50/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last clearing of counters: Never
Last 30 seconds input rate 3959.10 bytes/sec, 31672 bits/sec, 21.16
packets/
sec
Last 30 seconds output rate 31.60 bytes/sec, 252 bits/sec, 0.43
packets/sec
Input: 1049771 packets, 195819200 bytes
0 broadcasts, 0 multicasts
12 errors, 0 runts, 0 giants,
4 CRC, 0 align errors, 0 overruns,
0 dribbles, 4 aborts, 0 no buffers
4 frame errors
Output:15161 packets, 743016 bytes
0 errors, 0 underruns, 0 collisions
0 deferred
View This command can be used in the following views:
■ Any view