Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display fr pvc-infoc ● 91
Command Reference
display fr pvc-infoc
Purpose Use the display fr pvc-info command to view the frame relay PVC table.
This command displays the statistics about the frame relay PVC status and
receiving/sending data on this PVC.
Syntax display fr pvc-info [ interface interface-type interface-num ]
Parameters interface-type
interface-num
Specifies an interface. It can be a main interface or a
sub-interface.
Example Display the frame relay PVC table.
<3Com> display fr pvc-info
PVC statistics for interface Serial1/0/0 (DTE, physical UP)
DLCI = 100, USAGE = UNUSED (0000), INTERFACE = Serial1/0/0
create time = 2000/04/01 23:55:39, status = active
in BECN = 0, in FECN = 0
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
DLCI = 102, USAGE = LOCAL (0010), INTERFACE = Serial1/0/0.1
create time = 2000/04/01 23:56:14, status = active
in BECN = 0, in FECN = 0
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
View This command can be used in the following views:
■ Any view
Table 1 Description on the fields of the display fr pvc-info command
Field Description
PVC statistics for
interface Serial1/0/0
(DTE, physical UP)
Display information about PVCs on the frame relay interface
DLCI = 100, USAGE =
UNUSED (0000),
INTERFACE = Serial1/0/0
DLCI 100 was assigned to the PVC through negotiation of LMI with
DCE end. Its state is unused, and it belongs to interface Serial 1/0/0.
create time =
2000/04/01 23:55:39,
status = active
Date and time creating the PVC and the state of the PVC
in BECN = 0, in FECN =
0
Received FECNs and BECNs
in packets = 0, in bytes
= 0
Received frames and bytes
out packets = 0, out
bytes = 0
Transmitted frames and bytes