Command Reference Guide

90 ● display fr pvc-group 3Com Router 5000 Family and Router 6000 Family
Command Reference
View This command can be used in the following views:
■ Any view
Description If no interface is specified, the displayed result does not provide information about
the interface where a PVC group is located.
Table 1 Descriptions on the fields of the display fr pvc-group command
Field Description
PVC group information for
interface Serial1/0/0 (DCE,
physical UP)
The interface Serial1/0/0 functions as DCE and its physical layer
is up.
PVC-GROUP NAME: 123 The name of the PVC group is 123.
Interface: Serial1/0/0 PVC group 123 is located on interface Serial1/0/0.
Protocol: IP IP protocol is used for data transmission.
State: ACTIVE PVC group 123 is active.
PVC DLCI: 100 The PVC group includes a PVC with the DLCI of 100.
ip-precedence: The precedence identifier of IP packet is used to differentiate
the flows.
Grade: 0 - 3 The PVC with DLCI 100 carries IP packets of priority levels from
0 to 3.
bump: 4 When the PVC with the DLCI of 100 goes down, the PVC for
carrying IP packets of priority level 4 (that it, the PVC with the
DLCI of 200) takes over for the failed PVC.
protect: individual The PVC with the DLCI of 100 is configured to be protected
individually.
state: ACTIVE The PVC with the DLCI of 100 is active.