Command Reference Guide

86 ● display fr statistics 3Com Router 5000 Family and Router 6000 Family
Command Reference
display fr statistics
Purpose Use the display fr statistics command to view the current Frame Relay
statistics about receiving and sending packets.
Syntax display fr statistics [ interface interface-type interface-num ]
Parameters interface-type
interface-num
Specifies an interface. It can only be a main interface.
Example Display the Frame Relay statistics about receiving and sending packets.
<3Com> display fr statistics
Frame relay packet statistics for interface Serial1/0/0 (DTE)
in packets = 84, in bytes = 1333
out packets = 92, out bytes = 1217
discarded in packets = 13, discarded out packets = 0
Frame relay packet statistics for interface Serial1/1/0 (DCE)
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
discarded in packets = 0, discarded out packets = 0
View This command can be used in the following views:
■ Any view
Description The output information of this command can help the user to perform FR traffic
statistics and fault diagnosis.
Related Command display interface
Table 1 Description on the fields of the display fr statistics command
Field Description
Frame relay packet statistics for interface
Serial1/0/0 (DTE)
Display frame relay packet statistics for the interface
in packets = 84, in bytes = 1333 Received packets and bytes
out packets = 92, out bytes = 1217 Transmitted packets and bytes
discarded in packets = 13, discarded out
packets = 0
Dropped incoming/outgoing packets