Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display fr lmi-info ● 85
Command Reference
display fr lmi-info
Purpose Use the display fr lmi-info command to view the statistics of LMI protocol
frame.
Syntax display fr lmi-info [ interface interface-type interface-num ]
Parameters interface-type
interface-num
Specifies an interface.
Example Display the statistics of LMI protocol frame.
<3Com> display fr lmi-info
Frame relay LMI statistics for interface Serial0/0 (DTE,
NONSTANDARD-COMPATIBLE)
T391DTE = 10 (hold timer 10)
N391DTE = 6, N392DTE = 3, N393DTE = 4
out status enquiry = 0, in status = 0
status timeout = 0, discarded messages = 0
Frame relay LMI statistics for interface Serial2/0/0 (DCE, ANSI)
T391DTE = 0 (no keepalive)
T392DCE = 15, N392DCE = 3, N393DCE = 4
in status enquiry = 0, out status = 0
status enquiry timeout = 0, discarded messages = 0
View This command can be used in the following views:
■ Any view
Description The LMI protocol is used to maintain the current Frame Relay link, including the status
enquiry packet and status packet. The displayed information helps you to diagnose
the faults.
Related Command fr interface-type
Table 1 Description on the fields of the display fr lmi-info command
Field Description
Frame relay LMI statistics for interface
Serial1/0/0(DTE,
NONSTANDARD-COMPATIBLE)
Terminal type and LMI protocol type for the frame
relay interface
T391DTE = 10 (keepalive 10) DTE-side T.391 setting
N391DTE = 6, N392DTE = 3, N393DTE = 4 DTE-side N.391, N.392, and N.393 settings
out status enquiry = 96 State enquiry packets sent out the interface
in status = 85 Status packets received on the interface
status timeout = 3, discarded messages = 3 Timeout status packets and dropped packets