Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display fr inarp-info ● 83
Command Reference
display fr inarp-info
Use the display fr inarp-info command to view statistics about frame relay
inverse ARP (INARP) packets, including requests and replies.
Syntax display fr inarp-info [ interface interface-type interface-num ]
Parameters interface-type
interface-num
Specifies an interface. It can only be a main interface.
Example Display statistics about frame relay INARP packets.
<3Com> display fr inarp-info
Frame relay InverseARP statistics for interface Serial1/0/0 (DTE)
In ARP request Out ARP reply Out ARP request In ARP reply
0 0 1 1
View This command can be used in the following views:
■ Any view
Description According to the output of this command, you can diagnose whether INARP is
operating normally.
Related Command fr inarp
Table 1 Description on the fields of the display fr inarp-info command
Field Description
Frame relay InverseARP statistics for
interface Serial1/0/0 (DTE)
Display frame relay INARP packet statistics for the interface
In ARP request Received ARP requests
Out ARP reply Transmitted ARP replies
Out ARP request Transmitted ARP requests
table body table body
table body table body