Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display bridge traffic ● 79
Command Reference
View This command can be used in the following views:
■ Any view
Table 1 Description on the fields of the display bridge traffic command
Field Description
Input Type and quantity of input packets on the interface. “10
total,1bpdu, 2 single” indicates there are totally 10 data packets
input, with 1 BPDU packet and 2 single broadcast packets.
Output Type and quantity of output packets on the interface.
Send way Way of data transmission.
Discard Reason for discarding and quantity of discarded packets.
0 by inport state Frames discarded due to the abnormal in-port state.
0 for local frame Frames discarded as the out-port is also the in-port.
0 by mac table Frames discarded due to the "deny" entry configured in MAC
forwarding table.
0 by inport filter Frames discarded due to the filter rule configured on the in-port.
0 by outport filter Frames discarded due to the filter rule configured on the out-port.
0 by ip filter Frames discarded due to the filter rule configured at the IP layer.
0 other Frames discarded due to other reasons.