Command Reference Guide

72 ● display bridge address-table 3Com Router 5000 Family and Router 6000 Family
Command Reference
display bridge address-table
Purpose Use the display bridge address-table command to view the information of
MAC address forwarding table.
Syntax display bridge address-table [ bridge-set bridge-set | interface
interface-type interface-number | mac mac-address | dlsw ] [ dynamic |
static ]
Parameters bridge-set
Bridge set number. Valid values are 1 to 255.
interface-type
Interface type.
interface-number
Interface number.
mac-address
MAC address, a group of numbers in hex with the
form of xxxx-xxxx-xxxx.
dlsw
Displays the MAC address table of DLSW.
dynamic
Displays dynamic address entries.
static
Displays static address scanning entries.
Example Display all the static table entries in the address table.
[3Com] display bridge address-table static
Display the dynamic address entry with MAC address 1-1-1.
[3Com] display bridge address-table mac 1-1-1 dynamic
The information displayed, and to be described in the following table
is:
Mac-address Set Flag Aging-time Receive Send Interface-name
Flag meaning: P--PERMIT N--DENY D--DYNAMIC S--STATIC
Table 1 Description on the fields of the display bridge address-table command
Field Description
Mac-Address MAC address
Set Bridge set number
Flag Four options available: P--PERMIT, N--DENY, D--DYNAMIC and
S--STATIC
P refers to the "permit" rule in the MAC address filtering;
N refers to the "deny" rule in the MAC address filtering;
D refers to an dynamic entry;
S refers to a static entry.
Aging-time Time a forwarding table entry has existed.
Receive Number of Packets number received with this destination MAC
address
Send Number of Packets sent to this destination MAC address
Interface-name Name of the outbound interface