Command Reference Guide

68 ● display atm pvc-group 3Com Router 5000 Family and Router 6000 Family
Command Reference
display atm pvc-group
Purpose Use the display atm pvc-group command to view the information about
PVC-Group.
Syntax display atm pvc-group [ interface interface-type interface-num [ pvc {
pvc-name [ vpi/vci ] | vpi/vci } ] ]
Parameters interface-type
Interface type, specifies an ATM interface together
with
interface-num.
interface-num
Interface number, specifies an ATM interface together
with
interface-type.
pvc-name
PVC name, optional. If no PVC name and no VPI/VCI
pair are specified, the information about all
PVC-Groups within the specified ATM interface will be
displayed by default.
vpi/vci
VPI/VCI pair, optional. For more details, please refer to
“Parameter description” in the pvc command.
Example Display the information about PVC-Group of all ATM interfaces.
<3Com> display atm pvc-group
VPI/VCI PVC-NAME STATE ENCAP PROT INTERFACE GROUP
1/32 3Com UP SNAP IP Atm10/1/0(UP) 1/32(UP)
1/33 UP SNAP IP Atm10/1/0(UP) 1/32(UP)
3/34 UP SNAP IP Atm10/1/0(UP) 1/32(UP)
2/32 UP MUX IP Atm10/1/0.1(UP) 2/32(UP)
2/33 UP MUX IP Atm10/1/0.1(UP) 2/32(UP)
View This command can be used in the following views:
■ Any view
Description If no interface is specified, information about the PVC-groups on all ATM interfaces is
displayed by default.
Table 1 Description on the fields of the display atm pvc-group command
Field Description
VPI/VCI PVC identifier
PVC-NAME PVC name
STATE PVC state
ENCAP Encapsulation of the PVC
PROT Protocol running on the PVC
INTERFACE Interface to which the PVC belongs and physical layer state of the
interface
GROUP PVC group to which the PVC belongs and the status of the group