Command Reference Guide

64 ● display atm interface 3Com Router 5000 Family and Router 6000 Family
Command Reference
display atm interface
Purpose Use the display atm map-info command to view the information about the
upper layer protocol mapping table of ATM.
Syntax display atm interface [ interface-type interface-num ]
Parameters interface-type
Interface type, specifies an ATM interface together
with
interface-num.
interface-num
Interface number, specifies an ATM interface together
with
interface-type.
Example Display the information about ATM interface atm6/0/0.
[3Com-Atm6/0/0] display atm interface atm 6/0/0
ATM interface Atm6/0/0, State UP
Port Information:
Maximum VCs: 1024
PVCs: 5, MAPs: 1
input pkts: 11603, input bytes: 426476, input pkt errors: 37092
output pkts: 14053, output bytes: 519106, output pkt errors: 0
Main interface Information:
PVCs: 4, MAPs: 1
input pkts: 11603, input bytes: 426476, input pkt errors: 19210
output pkts: 14053, output bytes: 519106, output pkt errors: 0
ATM interface Atm6/0/0.1, point-to-point, State UP
Sub-interface Information:
PVCs: 1, MAPs: 0
input pkts: 0, input bytes: 0, input pkt errors: 17880
output pkts: 0, output bytes: 0, output pkt errors: 0
View This command can be used in the following views:
■ Any view
Description If no interface is specified, information on all ATM interfaces is displayed by default.
Table 1 Description on the fields of the display atm interface command
Field Description
ATM interface Atm6/0/0, State UP Name and state of the interface
Maximum VCs Maximum number of VCs on the ATM interface
PVCs Number of PVCs configured on the interface
MAPs Number of maps on the interface
input pkts: 0, input bytes: 0, input pkt errors: 0 Received packets, bytes, and errors
output pkts: 69, output bytes: 2218, output
pkt errors: 8
Transmitted packets, bytes, and errors