Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display atm class ● 63
Command Reference
display atm class
Purpose Use the display atm class command to view the information about ATM-Class.
By default, if no ATM-Class name is specified, the information of all ATM-Class is
displayed.
Syntax display atm class [ atm-class-name ]
Parameters atm-class-name
ATM-Class name.
Example Display the information about the ATM-Class named "main" in devices.
<3Com> display atm class main
ATM CLASS: main
Service ubr 8000
encapsulation aal5snap
View This command can be used in the following views:
■ Any view
Related Command atm class
Table 1 Description on the fields of the display atm class command
Field Description
ATM CLASS : main ATM class name
Service ubr 8000
encapsulation aal5snap
Commands configured in the ATM class. The contents vary
depending on your actual configuration