Command Reference Guide

62 ● dialer isdn-leased 3Com Router 5000 Family and Router 6000 Family
Command Reference
dialer isdn-leased
Purpose Use the dialer isdn-leased 128k command to configure 128K leased line
connection.
Use the undo dialer isdn-leased 128k command to delete 128K leased line
connection.
Use the dialer isdn-leased number command to configure 64K leased line
connection.
Use the undo dialer isdn-leased number command to delete 64K leased line
connection.
Syntax dialer isdn-leased { 128k | number }
undo dialer isdn-leased { 128k | number }
Parameters 128k
128K ISDN leased line connection.
number
64K ISDN leased line connection. Valid values are 0 or
1.
Default By default, no ISDN leased line connection is configured.
Example Configure 128K leased line connection.
[Router-Bri0/0/0] dialer isdn-leased 128k
View This command can be used in the following views:
■ ISDN BRI Interface view
Description You must manually delete the existing leased line configuration before switching from
single B channel lease line to 128K leased line.
You cannot configure this command on the BRI interfaces provided by 2S1B modules.
For more information about configuring ISDN leased lines on CE1/PRI and CT1/PRI
interfaces, refer to the
dialer isdn-leased command in the “Dial-up” part of
this manual.