Command Reference Guide

54 ● debugging pppoe-client 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging pppoe-client
Purpose The command debugging pppoe-client is used to enable PPPoE Client
debugging switch.
Syntax debugging pppoe-client option [ interface type number ]
Parameters option
PPPoE Client debugging switch type, see the following
table for more details.
interface type number
Interface type and number, used to enable the
debugging switch of the specified interface. If no
interface is specified, the system will enable the
debugging switch of all interfaces.
Example None
View This command can be used in the following views:
■ User view
Table 1 PPPoE Client debugging switch type and explanation
Debugging switch Description
All Enable all PPPoE Client debugging switches
data Enable the PPPoE Session phase data packet debugging switch
error Enable PPPoE Client error information debugging switch
event Enable PPPoE Client event debugging switch
packet Enable PPPoE Discovery phase negotiation packet debugging switch
verbose Display the verbose contents of PPPoE data