Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging bridge ● 43
Command Reference
debugging bridge
Purpose Use the debugging bridge command to enable the debugging function of a
bridge set.
Use the undo debugging bridge command to disable the debugging function.
Syntax debugging bridge eth-forwarding [ dlsw | interface interface-type
interface-number ]
undo debugging bridge eth-forwarding [ dlsw | interface interface-type
interface-number ]
Parameters interface-type
Interface type.
interface-number
Interface number.
Example Enable the debugging function of the bridge set.
<3Com> debugging bridge eth-forwarding
View This command can be used in the following views:
■ User view