Command Reference Guide

40 ● debugging atm event 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging atm event
Purpose Use the debugging atm event command to enable the event debugging of
ATM.
Use the undo debugging atm event command to disable the debugging.
Syntax debugging atm event [ interface interface-type interface-num [ pvc {
pvc-name [ vpi/vci ] | vpi/vci } ] ]
undo debugging atm event [ interface interface-type interface-num [ pvc
{ pvc-name [ vpi/vci ] | vpi/vci } ] ]
Parameters interface-type
Interface type, specifies an ATM interface together
with
interface-num.
interface-num
Interface number, specifies an ATM interface together
with
interface-type.
pvc-name
PVC name, optional. If no PVC name and no VPI/VCI
pair are specified, all the event debugging of PVC will
be enabled.
vpi/vci
VPI/VCI pair, optional. For more information, refer to
“Parameter Description” for the pvc command.
Default By default, all ATM event debugging is disabled.
Example The example is a case to enable the debugging of ATM events and display the results.
Enable all ATM event debugging.
<3Com> debugging atm event
View This command can be used in the following views:
■ User view
Description If no interface is specified, all ATM event debugging, global, interface level, or PVC
level, is enabled.
This command is used to enable all the debugging of events that happen at the ATM
interface or a PVC, which can be used to trace some essential events of the system.
Such information may be helpful for detecting network faults.