Command Reference Guide

3Com Router 5000 Family and Router 6000 Family datetime local ● 37
Command Reference
datetime local
Purpose Use the datetime local command to configure the Datetime information
element in the Connect message to use local time in an ISDN call.
Use the undo datetime command to configure the Datetime information element
not to use local time.
Syntax datetime local
undo datetime
Parameters None
Default By default, no local time is used.
Example In PRI subscriber line set the datetime information element to use local time.
[Router-voice-line1/0:15] datetime local
View This command can be used in the following views:
■ PRI and BSV voice interface voice subscriber line view