Command Reference Guide

3Com Router 5000 Family and Router 6000 Family channel ● 33
Command Reference
channel
Purpose Use the channel command to add X.25 interface or XOT channel of one serial port
to the current hunt group.
Use the undo channel command to delete the specified interface or XOT channel
from the current hunt group.
Syntax channel { interface serial interface-number | xot ip-address }
undo channel { interface serial interface-number | xot ip-address }
Parameters interface-number
Interface number. Valid values are 0 to 3.
ip-address
IP address of the peer XOT host.
Example Add the serial interface serial0/0/0 to the hunt group hg1.
[3Com] x25 hunt-group hg1 round-robin
[3Com-hg-hg1] channel interface serial0/0/0
View This command can be used in the following views:
■ X.25 Hunt Group view
Description One interface may belong to six hunt groups at most at the same time.
Related Command x25 hunt-group