Command Reference Guide

32 ● cell-packing 3Com Router 5000 Family and Router 6000 Family
Command Reference
cell-packing
Purpose Use the cell-packing command to set the maximum number of cells to be
packed in one PVC.
Use the undo cell-packing command to restore to the default value.
Syntax cell-packing cell-number
undo cell-packing
Parameters cell-number
Number of cells to be packed in a PVC. Valid values are
1 to 28.
Default By default, the maximum number of packet is one.
Example Configure on PVC1/32 the maximum number of cells to be packed to 22.
<3Com> system-view
[3Com] interface atm 1/0/0
[3Com-Atm1/0/0] atm-ctt
[3Com-Atm1/0/0] pvc 1/32
[3Com-atm-pvc-Atm1/0/0-1/32] cell-packing 22
View This command can be used in the following views:
■ PVC view
Description If the number of cells in a buffer reaches the maximum number of cells to be packed,
the cells in the buffer will be packed together with those in a PVC and sent.