Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
841842843844845846847848849850
3Com Router 5000 Family and Router 6000 Family bridge vlanid-transparent-transmit enable ● 29
Command Reference
bridge vlanid-transparent-transmit enable
Purpose Use the bridge vlanid-transparent-transmit enable command to
enable VLAN ID transparent transmission.
Use the undo bridge vlanid-transparent-transmit enable to disable
VLAN ID transparent transmission.
Syntax bridge vlanid-transparent-transmit enable
undo bridge vlanid-transparent-transmit enable
Parameters None
Default By default, VLAN ID transparent transmission is disabled.
Example Enable VLAN ID transparent transmission on interface atm1/0/0.
<3Com> system-view
[3Com] interface atm 1/0/0
[3Com-ATM1/0/0] bridge-set 2
[3Com-ATM1/0/0] bridge vlanid-transparent-transmit enable
View This command can be used in the following views:
■ Interface view
Description Before enabling VLAN ID transparent transmission on an interface, you must first add
this interface to the bridge set; otherwise, the system prompts you the interface is not
added to the bridge set.