Command Reference Guide

3Com Router 5000 Family and Router 6000 Family bridge routing-enable ● 19
Command Reference
bridge routing-enable
Purpose Use the bridge routing-enable command to enable the routing function of the
bridge.
Use the undo bridge routing-enable command to disable the routing
function of the bridge.
Syntax bridge routing-enable
undo bridge routing-enable
Parameters None
Default By default, the routing function of the bridge is disabled.
Example Enable routing on the bridge.
[Router] bridge routing-enable
View This command can be used in the following views:
■ System view
Description The routing function for a protocol can be implemented only when routing is enabled
on the bridge.