Command Reference Guide

16 ● bridge learning 3Com Router 5000 Family and Router 6000 Family
Command Reference
bridge learning
Purpose Use the bridge learning command to enable forwarding by dynamic address
table.
Use the undo bridge learning command to disable forwarding by dynamic
address table and forward by static address table only.
Syntax bridge bridge-set learning
undo bridge bridge-set learning
Parameters bridge-set
Bridge set number to which the interface belongs.
Valid values are an integer between 1 and 255.
Default By default, the dynamic address table is used in forwarding.
Example Enable dynamic MAC address learning.
[3Com] bridge 1 learning
View This command can be used in the following views:
■ System view
Description The dynamic address table does not require manual maintenance, as it is
automatically refreshed whenever the network topology changes.