Command Reference Guide

14 ● bridge bridging 3Com Router 5000 Family and Router 6000 Family
Command Reference
bridge bridging
Purpose Use the bridge bridging command to enable the bridging functuin of a network
layer protocol on a specified bridge set.
Use the undo bridge bridging command to disable the bridging function of a
network layer protocol on specified bridge set.
Syntax bridge bridge-set bridging { ip | ipx | others}
undo bridge bridge-set bridging { ip | ipx | others }
Parameters bridge-set
Bridge set number. Valid values are 1 to 255.
ip
Internet Protocol.
ipx
Internet Packet Exchange Protocol.
others
Other network protocols, for example OSI protocol.
Default By default, the bridging function is enabled.
Example Disable the bridging function of the IP protocol from bridge 1.
[3Com] undo bridge 1 bridging ip
Enable the bridging function of the IP protocol on bridge 1.
[3Com] bridge 1 bridging ip
View This command can be used in the following views:
■ System view
Description The packets that cannot be routed will be discarded when the bridging function of
the IP, IPX protocol, or other protocols is disabled on a bridge set.