Command Reference Guide

3Com Router 5000 Family and Router 6000 Family bridge bridge-set enable ● 13
Command Reference
bridge bridge-set enable
Purpose Use the bridge bridge-set enable command to enable the specified bridge set.
Use the undo bridge bridge-set enable command to disable the specified
bridge set.
Syntax bridge bridge-set enable
undo bridge bridge-set enable
Parameters bridge-set
Bridge-set number. Valid values are 1 to 255.
Example Enable bridge-set 1.
[Router] bridge 1 enable
View This command can be used in the following views:
■ System view
Description When there is an interface in the bridge set, it cannot be deleted.