Command Reference Guide

10 ● atm-ctt 3Com Router 5000 Family and Router 6000 Family
Command Reference
atm-ctt
Purpose Use the atm-ctt command to set all interfaces on a board to transparent
transmission.
Use the undo atm-ctt command to set all interfaces on a board to non transparent
transmission state.
Syntax atm-ctt
undo atm-ctt
Parameters None
Default By default, all interfaces on all boards are in non transparent transmission state.
Example Set the board to transparent transmission.
<3Com> system-view
[3Com] interface atm 1/0/0
[3Com-Atm1/0/0] atm-ctt
View This command can be used in the following views:
■ ATM interface view
Description This command is only valid on the first ATM interface on a board.