Command Reference Guide

336 ● vlan-type dot1q vid 3Com Router 5000 Family and Router 6000 Family
Command Reference
vlan-type dot1q vid
Purpose Use the vlan-type dot1q command to set the encapsulation types on the
sub-interface.
Syntax vlan-type dot1q vid vid
Parameters vid
VLAN ID identifying a VLAN. Its value range varies with
device model.
Default By default, there is no encapsulation on the subinterface, nor VLAN ID related to the
subinterface.
Example Set the Ethernet sub-interface 2/0/0.1 to be related to VLAN ID 60, and its
encapsulation format is dot1q.
[3Com -Ethernet2/0/0.1] vlan-type dot1q vid 60
View This command can be used in the following views:
■ Interface view
Related Command display vlan interface